The range is a very important part of any house or apartment. The rapid heating used in the combustion of gas gives an advantage over electric ranges. But like any technique, the gas range can break down. Find a wizard for gas range repair you can contact the Appliance Service Center. Our company employs professional specialists. We provide quality UNIQUE Range Repair in San Diego County. Our company performs quality repairs on your equipment.

Our company has been in the appliance repair market since 2001. Our staff includes UNIQUE Range Repair and Service specialists with over 20 years of experience.

Consider the most common breakdowns

Breakdown of burners, flame spreaders

Gas burners suddenly turn off on their own – most likely the cause is the solenoid valve, which is responsible for the gas supply to the burner. Also pay attention to the temperature sensor (thermocouple).

Faulty ignition (ignition unit)

Usually, the gas supply in this situation is all right. If, on the other hand, the ignition unit stops giving off a spark to the spark plug, it must be replaced by a UNIQUE Range Repairs.

Feed regulator malfunction

Usually, with prolonged use, the gas regulators, which are located behind the knobs, can malfunction. In this case, external cleaning, lubrication, or replacement can help. The UNIQUE Range Repair and Service specialists will solve this problem when you contact us.

Noise during burner operation

The malfunction occurs when the burner is not properly installed after cleaning. The solution is to check the correct installation. If the problem persists, consider replacing the flame spreader at UNIQUE Range Repair.

Uneven burning of the burners

If one burner has a higher flame than the others, it is time to replace the nozzles on that burner. If the flame increases on all burners, it is necessary to check the pressure in the gas supply system. It is better to call a UNIQUE Range Repairs and Services technician.

If the flame is low

This is the same as with a strong flame! Check the hose for pinching, and if the problem persists, call a UNIQUE Range Repair technician. As there is most likely a fault in the pressure system.

The burner does not light up, it does not light up immediately, what can it be?

• A clogged nozzle.
• Spark plug failure.
• Dislocated burner (burner).
• Control system malfunction (leaks).

Spit burners are smoking

Check nozzles for contamination. This is probably the only reason. Because the products of cooking in the process of operation “mysteriously” get into all corners of the stove causing clogging and as a result interfere with the work of the range.

Gas taps are difficult to turn

This is mainly caused by grease build up on the pivoting mechanisms (knob and plastic rings). Take everything off and wash with soapy water. To a lesser extent occurs due to lack of lubrication inside the faucet. You should disassemble the faulty faucet, clean out the old graphite grease and apply new grease. Do not overdo the amount of grease, or over time the holes in the faucet will become clogged with excess.

It’s best to get help from the Appliance Service Center, who will help you with repairs in complete safety. Gas ranges, if provided with timely service, will last a long time. You can have your equipment serviced by a trusted company. Many of the malfunctions can be fixed by UNIQUE Range Repair and Service technicians, but there are also cases where the unit goes completely out of business if customers don’t call in time to fix the problems.