Ice makers are special machines for producing ice, which are widely used in the catering industry. Repairing complex equipment by your own efforts rarely leads to a positive result, so we recommend that you contact the specialists of Appliance Service Center right away. Our staff is made up of top-notch professionals. We perform quality Mondawe Commercial Ice Maker Repair in San Diego County.

Ice maker malfunctions

Drain hose or drain is clogged

The principle of how the drain hose in an ice maker is connected and works is similar to a washing machine, but clogs are much more common. At the same time, you may notice water and non-freezing cubes inside the chamber.

Evaporator thermostat

It signals the temperature in the chamber to the module. To perform the check, press the spring of the part on the back side.

Solenoid valve

The valve shuts off the flow of refrigerant to the evaporator to freeze the liquid. It opens before starting the defrost, allowing hot flow into the evaporator. A current is applied to the defrost coils to check if it opens or not. A resistance is measured on the defrost coil. You can contact our company, we have qualified Mondawe Commercial Ice Maker Repair and Service technicians who will fix this problem.

Clogged nozzles or faulty pump (no water coming in)

Abnormal ice shapes or incomplete filling of the molds are common signs of malfunction.

Opaque cubes are produced

This happens when using hard water, which contains a lot of lime and calcium. If you have a lot of impurities in your area, be sure to install a purification filter. The experts at Mondawe Commercial Ice Maker Repairs can help you set up your commercial ice maker.

Thermostat or switch malfunction

If the ice maker won’t turn on or shuts off after fifteen minutes of operation, the hopper thermostat is probably defective. No ice will be made, or the pressure switch will trip in an emergency condition. The hopper thermostat is used to control the ice production. As soon as the temperature in the chamber reaches a certain point, the unit is unplugged. Mondawe Commercial Ice Maker Repair and Service technicians will replace the thermostat and other parts with a warranty.

Evaporator doesn’t freeze

Pressure is higher than normal during suction. The water valve or solenoid valve may be open. Mondawe Commercial Ice Maker Repair technicians will check and replace elements.

Evaporator is not freezing properly

The pressure is probably lower than normal. This happens as a result of a clogged capillary or refrigerant leak. The blockage must be found and repaired, and the condition of the filter-drier must be checked. Eliminate the leak and refill the system with refrigerant.

Ice is produced longer than usual

If the cycle lasts longer than half an hour, half of the cubes are irregularly shaped, which means that the radiator is clogged (relevant for air-cooled generators). The radiator needs to be cleaned right away. We have Mondawe Commercial Ice Maker Repairs and Services specialists who will do the service, when you contact us.

Noisy unit operation

When you hear noise and whistling while your generator is running, the condenser micromotor is probably worn out. Mondawe Commercial Ice Maker Repair does this work.

If you have noticed the above problems, then contact our Appliance Service Center technicians, who will solve them quickly and competently. You can rest assured that after our Mondawe Commercial Ice Maker Repair and Service-related refrigeration repair services, your appliances will work for as long as possible without even the smallest breakdowns.