Gas ranges attract consumers by the convenience of use and the cheapness of fuel. However, it should not be forgotten that when using such a device, certain safety rules should be observed. Do not turn on the gas if the gas range does not work properly, otherwise it will lead to dire consequences. If you find a breakdown, you should contact the Appliance Service Center. The experts at Range Repair in North Park, CA perform quality repairs in a timely manner.

Our service center has the best professional technicians at North Park Range Repair who will perform quality appliance repairs. They have over 20 years of experience. We have been in business since 2001.

What are the signs of malfunction

One of the most “ridiculous” breakdowns in which the ignition won’t turn on is forgetting to plug the plug into the outlet. If your stove is plugged in, pay attention to the following points:

1. Whether or not the auto ignition occurs when the gas is applied, and the button is started at the same time.
2. You hear a crackling sound, but no spark appears, therefore the flame does not ignite.
3. The burner turns off the moment you release the knob.
4. The device may go off when you are not using the igniter.
5. Triggering the ignition knocks out the circuit breaker in the electrical box.
6. The ignition circuit is shorted. This will require the assistance of Range Repair in North Park, CA.

If you also have one of these situations, contact the experts at North Park Range Repairs. There are several factors that are disruptive to the electrical ignition:

1. No spark is forming on the electrodes.
2. Grease or condensation droplets have gotten inside the ignition system.
3. The candle insulation is broken.
4. The transformer responsible for ignition is defective.
5. Contacts oxidized or short-circuited.

Breakdowns often occur when the stove is wet cleaned. They are repaired by stripping the contacts and listening to the candle. If a breakdown occurs, have the spark plug replaced by Range Repair in North Park, CA professionals.

The burner does not ignite immediately

Auto-ignition stove users sometimes encounter this breakdown – the burner ignites slowly or goes out. This occurs due to contamination of the thermocouple – a component that is located next to the burner.

You can clean the element with sandpaper, which is used in construction work. If cleaning doesn’t help, you may need to replace the piezo element or the entire thermocouple. Our North Park Range Repair professionals quickly perform the replacement.

Only one burner won’t light

There are times when one burner won’t light, and the others work fine. The most common reasons for this are:

1. Damage to the wire that goes to the electrode, a malfunction of the device that generates the spark or the entire unit.
2. Clogging of the nozzle. It is very often clogged with food remains. If this happens, you can fix the problem by cleaning or replacing the nozzle. The technicians at Range Repair in North Park, CA will fix the problem in no time.
3. Breakdown of the gas control element. In this case, the flame appears but goes out when the user releases the button. Breakdown is eliminated by replacing the whole mechanism or its individual elements.
4. Sometimes the gas supply is bad, and the burner does not light up immediately, if the gas tap does not turn properly, and the knob is clogged with carbon deposits, grease, and debris. It should be well cleaned and lubricated.

No electric ignition on several burners

In the service are periodically addressed with the problem when the ignition does not work on several burners, but they are normally lit with matches. This can occur because of the candle. The malfunction is most often corrected by cleaning it or checking the power cord. If there is damage to the spark plug, it should be replaced. Specialists will replace the motor when you contact us.

All burners do not light automatically

Why can’t all burners ignite?

• The gas supplied has low pressure and the nozzles need to be replaced.
• Electrical wiring breakdown, which can be solved by replacing or repairing the power supply wires.
• Breakdown of the unit that makes the ignition, corrected only by replacing this element. Specialists, at home, will conduct a diagnosis.

Many breakdowns can be fixed on your own. However, if you have made all possible attempts or do not know how to do it properly, trust Appliance Service Center to do the job. That way, you’ll keep yourself and your loved ones safe from accidents. North Park Range Repair and Service technicians can quickly identify the source of the problem. To keep your electric ignition working consistently, follow basic operating procedures, keep your range clean, and perform regular preventive maintenance.