Many users are familiar with cases where the freezer does not turn on and does not perform its functions. In such a situation, Appliance Service Center experts recommend that the first thing to do is to check if the thermostat is set correctly and if too much ice has formed in the freezer. Freezer Repair in Point Loma, CA professionals who have state-of-the-art equipment at their disposal can diagnose the problem.

Our company has been in the appliance repair market since 2001. Point Loma Freezer Repair specialists have over 20 years of experience.

Among the main reasons why the freezer may not turn on, it is worth allocating the failure of the compressor motor – it can be caused by both long-term work of the element at an increased capacity, and natural wear and tear of the parts.

One more possible variant is the freon leak, to fix the situation will help to refill the refrigerant and complete sealing of the system. Also, the cause of failure can be malfunction of the electronic control board. All these problems will be fixed by Freezer Repair in Point Loma, CA with a warranty.

The main causes of freezer breakdowns

It won’t hold the temperature

Another common reason to call Point Loma Freezer Repairs is when your freezer is not holding the set temperature.

Some of the most likely causes of the malfunction include:

• Damage to the door seals or wear and tear on the overhangs.
• Breakdown of temperature sensors.
• Freon leakage.
• Compressor failure.

Also, the thermos regulator, which is responsible for maintaining the optimum temperature mode, may be broken. Failure can be caused by a sudden voltage drop in the electrical system. In some cases, a clogged capillary is possible.

Because of which the cooling agent simply does not reach its destination, in which case the excess Freon, most likely, will settle in the condenser. Freezer Repair in Point Loma, CA electrical repair technicians will have your equipment repaired within a short time.

Frequent freezer defrosting

If your appliance is not equipped with No Frost, it will have to be defrosted manually, but even modern models still need to be defrosted periodically. The frequency of defrosting is usually specified in the instruction manual, but you can determine its necessity visually. In the case of No Frost systems, the manufacturers usually recommend defrosting the unit at least once a year, and this is best done in summer.

However, if you must defrost the device too often and a thick layer of frost appears on its walls within a few days, it can mean that there are serious problems. The most unpleasant moment is the failure of the automatics – only an experienced specialist can cope with such a breakdown, and the device may require quite a serious and lengthy repair.

Also, among the most probable reasons for the necessity of frequent defrosting are clogging of drainage holes, defrosting system failure or breakage of the temperature sensor. In rare cases, the reason may lie in the Freon leak, because of which the cold productivity decreases sharply, and the refrigerator compressor begins to work in a non-stop mode, which leads to the formation of large amounts of ice.

To maximize the service life of the freezer, it is necessary to follow the rules of operation of the device and ensure proper care.

There are a few rules that you can adhere to ensure that the equipment operates consistently for a long period of time:

• Take care of proper installation of the equipment, and it is better to entrust the matter to the professionals of Point Loma Freezer Repair.
• Install the unit in places where air circulation will not be restricted in any way.
• Only thoroughly packaged foods should be stored in the freezer because the excessive moisture they give off can cause frost to form in the evaporator.
• Do not overload the unit with excessive amounts of food and place them as far away from the control panel as possible to ensure good air circulation.

Set the temperature according to the storage requirements for the foods you want to keep. Proper operation of the freezer can avoid serious damage in many cases. If the unit does malfunction, trust Freezer Repair in Point Loma, CA to have it diagnosed and repaired.

A freezer is a very useful and necessary piece of equipment in the household. Keep in mind that a freezer is quite a complex electrical installation, and unskilled repairs can lead to a deterioration in the unit’s properties. When you see the first signs of a freezer breakdown, the right solution is to have the unit diagnosed at Appliance Service Center by an experienced technician. Our Point Loma Freezer Repair and Service technicians can determine the source of the problem and how to fix it.