The stove is an essential part of any home or professional kitchen. Stove failure leads to downtime, and that’s unacceptable for a commercial facility. The equipment is characterized by durability and reliability, but even the highest quality equipment can fail over time. Therefore, if such a helper breaks down, many people turn immediately to our company Appliance Service Center. We provide quality Stove Repair in Point Loma, CA. Our company provides warranty and post-warranty repairs for your equipment.

Our company is staffed by Point Loma Stove Repair specialists with over 20 years of experience. We have been in the appliance repair service market since 2001.

Let’s break down typical stove malfunctions and ways to fix them

Why the stove doesn’t turn on and how to solve the problem

This is one of the most common malfunctions in the work of any electric stove. As a rule, the cause is a failure of structural components, due to the natural wear and tear of parts. Usually, it concerns the electrical part. It is possible that the electric stove works, but the suspension does not function. In such a case, it is necessary to diagnose the signal indicator. The stove can be used in such cases, but the lamp should be replaced. This problem can be solved by Stove Repair in Point Loma, CA.

If there is no reaction when you turn on the stove, you need to check the plug and the continuity of the power cord

If the stove won’t turn on, it could be due to a lack of power. Probably, because the overload simply knocked out the circuit breakers. If you can’t find and fix the problem yourself, Point Loma Stove Repairs professionals will be needed. Quality replacement parts should be used for repairs, and it is best to contact a trusted supplier to find them. Certified and original components will last much longer than cheaper counterparts.

What are the reasons for the failure of the furnace:

• Breakdown of the heating device.
• Wear of the burners and their failure.
• Failure of the thermostat.
• Failures in the functioning of the control chip, because of which the technique does not work properly or does not turn on.
• Blown fuses due to voltage fluctuations.
• Most of the failed parts are replaced immediately.

Why burners malfunction

Failure of these parts leads to the fact that the operation of the stove becomes impossible. Burners are designed to distribute heat evenly over a pot or pan.

Causes of malfunction of these components

• Improper operation. Failure can be caused by using the wrong cookware for the stove. For example, if you use a pot with a concave bottom, there is a risk of damaging the burner. Before you put the cookware on the stove, set the required mode.
• Lack of power. If the burners stop working and the indicator lights go out, it means that the voltage in the socket disappeared. Fuses could have blown, automatic circuit breaker triggered, de-energized electric networks. First, you should check all these factors, if everything is intact, then it is better to ask whether the stove works at the neighbors – this will know whether the power grid is unplugged or only in your house there are problems with electrical wiring. Our Stove Repair in Point Loma, CA electricians will solve the problem. If, on the contrary, the burner is heating and the heat does not match the switch position, you can assume that one of the spirals has broken or the switch has broken. In case of a broken coil, you need to replace it, if it is intact – you need to replace the switch.

• Coil failure. This is one of the main elements of the burner. The coil is inserted into the body and heats up because of the voltage applied. Since there is a high load on the part, the risk of failure is quite high with intensive use of the technique. Point Loma Stove Repair can help with replacing the coil.

• Limiter failure. This component is used to turn off the stove in case of overheating. When a burner malfunctions, Stove Repair in Point Loma, CA technicians will usually check the operation of the control module. The problem may be a broken circuit board, but you can’t fix the cause at home.

When your home has a problem with your electric stove, it is recommended that you get in touch with the skilled professionals at Appliance Service Center. Our company has been working in the field of appliance repair for quite a long time.  We guarantee high quality Point Loma Stove Repair and Service.