Frigidaire Washing Machine Makes a Humming Noise but Won’t Start — Possible Drain Pump or Motor Problems

A Frigidaire washing machine that makes a humming noise but does not begin the wash cycle is usually receiving power, but something is preventing the motor or another component from operating correctly. The sound may come from a pump trying to run, a motor that cannot turn, or an object blocking a moving part. Ignoring […]

Maytag Dishwasher Makes a Clicking Sound During Operation — Possible Motor or Electronic Control Problems

A dishwasher should produce a steady combination of water movement, spray sounds, and occasional draining noises during a normal cycle. A persistent or unusual clicking sound, however, can indicate that something inside the appliance is not operating correctly. When a Maytag dishwasher starts clicking during operation, the cause may range from a simple obstruction to […]

Samsung Washing Machine Makes a Grinding Noise During Spin — Possible Drum Bearing or Motor Problems

A Samsung washing machine should produce some noise during a normal wash cycle, especially when it is filling, draining, or accelerating into the spin cycle. However, a grinding noise that becomes louder as the drum spins should not be ignored. It can indicate mechanical wear inside the washer, including problems with the drum bearings, drive […]

Kenmore Elite Washing Machine Makes a Knocking Noise — Possible Shock Absorber or Drum Bearing Failure

A Kenmore Elite washing machine should operate with some normal sounds, including water filling, draining, tumbling, and the motor changing speed. However, a persistent knocking noise is different. If the washer begins banging, thumping, or knocking during the wash or spin cycle, the cause may involve the suspension system, drum bearings, or another mechanical component. […]

KitchenAid Dishwasher Stops Working During the Heating Cycle — Possible Heating Element or Control Board Failure

A KitchenAid dishwasher may run normally through filling, washing, and draining, then suddenly stop when it reaches the heating portion of the cycle. In some cases, the dishwasher may become completely unresponsive. In others, the cycle may remain stuck for a long time, dishes may stay wet, or the control panel may display an error. […]

GE Washing Machine Stops and Shows an Error Code — Possible Sensor or Control Board Failure

A GE washing machine that suddenly stops in the middle of a cycle and displays an error code is giving you information about a detected problem. The code may point to an issue with water supply, drainage, spinning, temperature, door or lid operation, or another part of the washing system. In some cases, the underlying […]

LG Refrigerator Runs but the Interior Light Does Not Work — Possible Door Switch or LED Module Failure

An LG refrigerator can continue cooling normally even when the interior light suddenly stops working. The compressor may run, the freezer may maintain its temperature, and the refrigerator may appear to be functioning as usual, yet opening the door leaves the interior completely dark. While this problem may seem minor compared with a cooling failure, […]

Samsung Refrigerator Condenser Coils Are Overheating — Possible Condenser Fan or Airflow Problems

A Samsung refrigerator depends on proper airflow and heat transfer to keep food at a safe temperature. One important part of this process is the condenser system. When the condenser coils become excessively hot, the refrigerator may have difficulty removing heat from the cabinet. A common reason is a problem with the condenser fan or […]

Samsung Dishwasher Has a Bad Odor — Possible Food Debris, Filter Buildup, or Drainage Problems

A bad smell coming from a Samsung dishwasher can make an otherwise clean kitchen unpleasant. If dishes come out clean but the dishwasher itself smells sour, musty, or like rotten food, the problem often comes from debris or standing water somewhere inside the appliance. Dishwashers constantly handle food particles, grease, detergent residue, and dirty water. […]

LG Washing Machine Fills with Water but Won’t Agitate: Possible Drive Motor or Control Board Failure

An LG washing machine that fills with water but does not agitate has completed only part of the wash cycle. The washer may open the water valves normally and reach the expected water level, yet the drum or agitator remains still when washing should begin. This problem can leave clothes soaking in the tub and […]