The stove is an essential part of any home or professional kitchen. Stove failure leads to downtime, and that’s unacceptable for a commercial facility. The equipment is characterized by durability and reliability, but even the highest quality equipment can fail over time. Therefore, if such a helper breaks down, many people turn immediately to our company Appliance Service Center. We provide quality Stove Repair in Santee, CA. Our company provides warranty and post-warranty repairs for your equipment.

We have Santee Stove Repair specialists with over 20 years of experience. We have been in the appliance service market since 2001.

Let’s break down typical stove malfunctions and ways to fix them

Why the stove doesn’t turn on and how to solve the problem

This is one of the most common malfunctions in the work of any electric stove. As a rule, the cause is a failure of structural components, due to the natural wear and tear of parts. Usually, it concerns the electrical part. It is possible that the electric stove works, but the suspension does not function. If this is the case, a diagnosis by the experts at Stove Repair in Santee, CA is necessary.

If there is no response when you turn on the stove, you need to check the plug and the continuity of the power cord

If the stove won’t turn on, it could be due to a lack of power. It’s possible that the overload has simply knocked out the circuit breakers. If you can’t find and fix the problem yourself, Santee Stove Repairs will be needed. Quality replacement parts should be used for repairs and it is best to contact a trusted supplier to find them. Certified and original components will last much longer than cheaper counterparts.

Why the furnace could fail

• Breakdown of the heating device.
• Wear of the burners and their failure.
• Failure of the thermostat.
• Failures in the functioning of the control chip, resulting in the technique not working properly or not turning on.
• Blown fuses due to voltage fluctuations.
• Most of the failed parts are replaced immediately.

Why burners malfunction

Failure of these parts leads to the fact that the operation of the oven becomes impossible. Burners are designed to distribute heat evenly over a pot or pan. Contact the service professionals at Stove Repair in Santee, CA when these parts fail.

Causes of failure of these components

Lack of voltage

If the burners stop working and the indicator lights go out, then the outlet power has gone out. Fuses may have blown, automatic protection triggered, de-energized electric networks. First you should check all these factors, if everything is intact, it is better to ask if the stove works at the neighbors – this will know whether the power grid is de-energized or only in your house there are problems with electrical wiring.

If, on the contrary, the burner is warm, but the heat does not correspond to the position of the switch, then you can assume that one of the coils is broken or the switch is broken. If the coil is broken, you need to replace it, if it is intact, you need to replace the switch. We have Santee Stove Repair electrical specialists to help fix these problems.

Limiter failure

This component is used to shut down the furnace in the event of overheating. When a burner malfunctions, Stove Repair in Santee, CA specialists will usually check the operation of the control module. The problem may be a broken circuit board, but you can’t fix the cause at home.

When you have a problem with your electric stove, we recommend contacting the skilled professionals at Appliance Service Center. Our company has been working in the field of household appliance repair for quite a long time.  We guarantee high quality of performance. We provide a company warranty on the performed repair work. The master will come to you on the day of the call. Call the experts at Santee Stove Repair and Service.