Range Repair in Point Loma
The gas range is a very popular household appliance. However, the gas range, as well as any other appliance can fail, in addition, its malfunction can threaten human health and life, so, not paying attention to the malfunction is categorically not recommended. In the event of a breakdown, contact an Appliance Service Center gas range repair technician. We perform quality Range Repair in Point Loma, CA.
Possible gas range stove malfunctions and troubleshooting
Gas odor from your gas range
If during or after you finish cooking, you smell gas coming from your gas range. If you can smell gas coming from a burner, it is most likely because the flame has not been properly adjusted. Contact Point Loma Range Repair immediately.
Other things that can cause gas leaks include
- Broken nozzle mounting point.
- A broken connection between the faucet tube and the nozzle.
- Damage to the joint between the tube and the nozzle body.
It is not recommended to repair the gas range yourself if a fault is detected. Shut off the blue fuel supply to the range and contact Range Repair in Point Loma, CA.
Gas range burner won’t light
The simplest cause, which is quite possible to fix on your own, is a nozzle gap. It could be clogged with food crumbs or grease that has “escaped” onto the range. To make the burner function again, it is necessary to clean the nozzle. To do this, remove the flame spreader and using a thin wire or needle, clean the nozzle hole. If you can’t fix it yourself, call Point Loma Range Repairs.
Gas range burner goes out during operation
If a burner goes out on its own while cooking, while it is clearly not a draft, you should pay attention to how the gas burns before it goes out.
Gas burns unevenly on all burners
In this situation, the first thing to check is the connection hose, see if it is squeezed, if so, simply straighten the hose and the blue fuel supply will be normalized. Range Repair in Point Loma, CA professionals will fix the problem.
The burner burns unevenly
If you notice that the gas is burning but not completely enveloping the flame spreader, you should clean the flame spreader itself. To do this, remove the burner and use a stiff brush to wash it with warm soapy water. To wash the part thoroughly, you can soak it beforehand. Point Loma Range Repair technicians will quickly repair this part.
Black bottom of pans after cooking
You find that the bottom of your cookware is covered in soot after cooking on the gas range. So, the gas range is smoking – you can check this by watching the burning gas. If the flame is yellow or orange in color when burning, and not the usual blue, then it will stain the dishes and, moreover, emit an unpleasant smell.
This behavior of the gas range can indicate these problems:
- The nozzle (nozzle nozzle) is clogged. Its cleaning is required.
- The burner is contaminated with fats and carbon deposits. It is necessary to remove, thoroughly wash and install it back.
- Deformed gas burner. It happens very rarely, but nevertheless the flare can be mechanically damaged, in this situation it will be necessary to replace the element with a new one.
Adjustments of the reducer of fuel supply to the device are broken. In this case, it is necessary to adjust the gas supply to the stove, for this it is better to contact a Range Repair in Point Loma, CA technician.
It should be noted that you can only do your own gas range repair if you are sure that it is safe to do so. In other situations, you should contact a trusted Appliance Service Center company. Many of the malfunctions can be fixed by Point Loma Range Repair and Service professionals, but there are also cases where the unit completely fails if customers don’t call in time to fix the problems.