The gas range is a very important part of any house or apartment. The rapid heating used in the combustion of gas gives an advantage over electric ranges. But like any technique, the gas range can break down. Find a wizard for gas range repair you can contact the Appliance Service Center. Our company employs professional professionals. We provide quality gas stove repair GE Profile Range Repair in San Diego County. Our company provides quality repairs for your equipment.

Our company has been in the appliance repair market since 2001. We have GE Profile Range Repair and Service specialists with over 20 years of experience.

Let’s take a look at the most common breakdowns

Breakdown of burners, flame spreaders

Gas burners suddenly turn off on their own – most likely the cause is the solenoid valve, which is responsible for the gas supply to the burner. You should also pay attention to the temperature sensor (thermocouple). Our GE Profile Range Repairs technicians will get the job done quickly.

Electric ignition (ignition block) malfunction

Normally, the gas supply is fine in this situation. But if the ignition unit has stopped providing a spark to the spark plug, it must be replaced.

Failure of the supply regulator. Control knobs

Usually, with long use, gas regulators, which are located behind the knobs, can fail. External cleaning, lubrication, or replacement can help. The experts at GE Profile Range Repair and Service will solve this problem when you contact us.

Noise during burner operation

The problem occurs if the burner is not properly installed after cleaning. The solution is to check the correct installation. If the problem is not eliminated, consider replacing the flame spreader.

Uneven burning of the burners

If one burner has a higher flame than the others, it is necessary to replace the nozzles on this burner. If the flame increases on all burners, it is urgent to check the pressure in the gas supply system. It is better to call a GE Profile Range Repair technician.

If the flame is weak on the other hand

This is the same as with a high flame! Check the hose for pinching and if the problem is still there, call a service technician. Most probably there is a problem with the pressure system.

The burners are smoking

Check nozzles for contamination. This is most likely the only reason. Because the products of cooking in the process of operation “mysteriously” get into all corners of the range causing clogging and as a result interfere with the work of the range. all repairs related to repair of nozzles will be made by specialists of GE Profile Range Repairs and Services.

Gas adjustment valves are difficult to turn

Mostly caused by grease buildup on pivoting mechanisms (adjustment knob and plastic rings). Take everything off and wash with soapy water. To a lesser extent occurs due to lack of lubrication inside the faucet. You should disassemble the faulty faucet, clean out the old graphite grease and apply new grease. Do not overdo the amount of grease, or over time the holes in the faucet will become clogged with excess. If you can’t do the faucet repairs yourself, contact the repairmen at GE Profile Range Repair.

In any case, with any breakdown, don’t take the risk of doing the repair yourself. Gas is first and foremost a hazard. It is better to seek help from the Appliance Service Center, who will help you with repairs in complete safety. Gas ranges, if provided with timely service, will last a long time. You can have your equipment serviced by a trusted company. Many of the problems can be fixed by GE Profile Range Repair and Service specialists but there are also cases where the unit goes completely out of business if customers don’t contact in time to fix the problems.