The gas range is a very popular household appliance. However, the gas range, as well as any other appliance is capable of malfunction, in addition, its malfunction can threaten human health and life, so, not paying attention to the problems is strongly not recommended. In the event of a breakdown, contact an Appliance Service Center gas range repair technician. We provide quality Kenmore Range Repair in San Diego County.

Possible gas range malfunctions and troubleshooting

Gas smell from the gas range

If you smell gas coming from a burner during or after cooking, it is most likely due to improper flame adjustment. Contact Kenmore Range Repair and Service immediately.

Other causes of gas leaks may include:

• Broken nozzle mounting point.
• A broken connection between the faucet tube and the nozzle.
• Damage to the joint between the tube and the nozzle body.

It is not recommended to repair your gas range if you find this problem. Shut off the blue fuel supply to the range and contact Kenmore Range Repairs.

Gas range burner won’t light

The simplest cause, which is quite possible to fix on your own, is a nozzle gap. It could be clogged with food crumbs or grease “escaping” to the range. To make the burner function again, it is necessary to clean the nozzle. To do this, remove the flame spreader and use a thin wire or needle to clean the nozzle hole. If you can’t fix it yourself, call Kenmore Range Repair and Service.

Gas range burner goes out during operation

If a burner goes out on its own during cooking, even though it’s clearly not a draft, you should pay attention to how the gas burns before it goes out.

Gas burns unevenly on all burners.

In this situation, the first thing to check is the connection hose, see if it’s squeezed, if so, simply straighten the hose and the blue fuel supply will be normalized. Kenmore Range Repair specialists will fix the problem.

Burner burns unevenly

If you notice that the gas is burning but not completely enveloping the flame-spreader, you should clean the flame-spreader itself. To do this, remove the burner and use a stiff brush to wash it with warm soapy water. To wash the part thoroughly, you can soak it beforehand. The specialists at Kenmore Range Repairs and Services will quickly repair this part.

Black bottom of pans after cooking

Have you found that the bottom of your cookware is covered in soot after cooking on the gas range? Then your gas range is smoking – you can check it by watching the gas burn. If the burning flame is yellow or orange, and not the usual blue, it will stain the dishes and, moreover, emit an unpleasant smell.

This behavior of the gas range can indicate the following problems:

• The nozzle (nozzle nozzle) is clogged. It needs to be cleaned.
• The burner is contaminated with grease and soot. The burner should be removed, thoroughly washed, and reinstalled.
• The gas burner is deformed. It happens very rarely, but nevertheless the flame-spreader can be mechanically damaged, in this situation it will be necessary to replace the element with a new one.
• Adjustment of fuel supply reducer to the device is broken. In this case, it is necessary to adjust the gas supply to the range, for this it is better to contact a master Kenmore Range Repair.

It should be noted that you can do your own gas range repair only if you are sure that it is safe to do so. In other situations, you should contact a trusted Appliance Service Center company. Many of the malfunctions can be fixed by Kenmore Range Repair and Service professionals, but there are also cases where the unit completely fails if customers don’t contact in time to fix the problems.