The washer-dryer is now a familiar and necessary household appliance for everyday use. But there are unpleasant moments – it breaks down and then many plans are ruined because of the additional troubles associated with laundry. In these situations, you can turn to the trusted professionals at Appliance Service Center. The best option for solving complex problems in washer repair is the team of professionals at Washer Repair in Santee, CA which is dedicated to repairing both household and other appliances.

The main types of breakdowns

Washer doesn’t draw water or draws water too slowly

If the water doesn’t come in, it means there is no pressure in the system. The cause is most often a blocked or kinked water tap, through which this water is supplied to the washer. The cause can also be a faulty valve. You should also check whether the washer doors are closed and whether the pressure in the water system has dropped. Our Santee Washer Repair technicians are quality to connect the washer to the water supply.

The washer does not heat water

This malfunction occurs quite often. Put your hand to the doors of the washer. If the glass of the doors becomes warm after the start of washing, it means that the heating element is working. If the glass is not heated, it is possible that the heating element was burned out. We have professional Washer Repair in Santee, CA electricians who will fix this problem in no time.

Washer won’t drain

How long has it been since you cleaned the drain pump filter? If you’re having trouble answering that question, you can try doing it now. If cleaning the filter did not help, then you will have to replace the drain pump. By the way, it is quite possible that it broke because of a clogged filter. You need to clean the filter regularly, and everything will drain properly. Our Santee Washer Repairs technicians will professionally clean the filter in your washer.

Water is leaking out from under the washer

If such a breakdown has occurred with a new appliance, contact a service center right away. Our craftsmen specializing in Washer Repair in Santee, CA will fix this problem, you will be diagnosed and repaired for free. Typically, a water source occurs when there is a manufacturing shortage or improper installation of the unit.

The washer won’t turn on

It could just be that no one plugged it into the outlet, or the automatic protection kicked out, which wasn’t picked up correctly. If there is nothing wrong with this, then the control unit is out of order. In rare cases, the cause is a faulty line filter.

Again, you need to properly connect the machine to the network. In case of suspicion of a faulty unit, you need to call a master. Our company has professional specialists in Santee Washer Repair, and they will replace the control unit very quickly.

Control module failure

Failure of the control module is a very unpleasant breakdown. Failure often occurs due to power outages and excessive electronics in modern washers. Voltage jumps during the operation of the machine causes the electronic module to malfunction. Washing stops, sometimes for a long time. All indicators can blink at the same time, and the machine does not turn on.

Some models of washing machines continue endless washing. The electronic display may show an error code indication. Unfortunately, a new electronic module costs a lot. It depends on the model of the washer machine. Usually, the board is repairable.

Sometimes the board needs to be reflated individually for each model. This involves removing the module, which is taken away for diagnosis by Washer Repair in Santee, CA. Control boards are diagnosed and repaired on proprietary stands. This makes it possible to properly recognize the breakdown and perform a complete test on all modes.

These are the most common causes of washer breakdowns. If the owner is faced with a malfunction and is inexperienced in these matters, it is best to contact the specialists of the company Appliance Service Center. More serious breakdowns, for which the washing machine cannot function, should preferably be done by Santee Washer Repair and Service.