Individual washer breakdowns can be repaired on your own, but most breakdowns require Appliance Service Center because of the complexity of the work and the need for certain tools. The best option for solving complex washer repair problems is the team of professionals at Washer Repair in Rancho Penasquitos, CA that handles both appliance and other repairs.

Let’s take a look at the main problems with washer repairs

The machine does not turn on

If the washer does not respond to the on / off button – perhaps the problem is in the electrical circuitry. Could be separated or oxidized contacts, fractured wiring, and so on. This situation will require the assistance of Rancho Penasquitos Washer Repair.

If there is no reaction when you start the wash – there are several options here:

• The door is not closed tightly, and the electronics are not giving the command to start the wash.
• The electronic module itself is broken, so it cannot give commands.
• There is a problem with the motor, and the repair or replacement of the motor is needed.

Only a Washer Repair in Rancho Penasquitos, CA appliance repair technician can provide an accurate “diagnosis”.

Water won’t come on

Maybe you just don’t have any water. For example, they just turned it off and you didn’t notice.

That’s one reason, and there are several options in general, too:

• The water supply tap in the washer is closed.
• Twisted the fill hose.
• The door does not fit tightly, and the electronic module did not give the command to draw water.
• The filter, which does not let the smallest particles of dust and scale from the water supply, is clogged.

If you cannot solve the problem yourself – call a master Rancho Penasquitos Washer Repairs, the matter is much more serious.

Water won’t heat up

The causes are usually two:

• The heating element (so-called TEN) is broken.
• The electronic module, which controls the temperature mode, is broken.

We should immediately note that the breakage of the TEN is the most common reason that the machine does not want to heat water. Also, replacing the heater will not be difficult if you have a model of the machine with an easily accessible location of the heating element, when you can get to it only by removing the back panel. But if your brand requires an almost complete disassembly of the appliance, it’s better to trust a Washer Repair in Rancho Penasquitos, CA technician.

The drum won’t spin

The most common case is a broken drum bearing. The prospect of further repairs depends largely on whether you have a collapsible tank or a non-collapsible one. If it is non-disassembled, you will have to change the entire drum assembly. If it’s collapsible, it’s easier. You just replace the worn-out part. If you’re not a professional repairman, or even an auto locksmith, it’s best not to try it yourself – call a Rancho Penasquitos Washer Repair professional.

Water won’t drain

But if the water stops draining at any stage of the wash, you’ll have to reach the laundry by hand. It can stop draining at any stage: after soaking, after washing, after rinsing before spinning.

There may be many reasons for this:

• A clogged drain hose.
• A clogged drain pumps.
• Clogged drain hose.
• Broken drain pump.
• The automatic fuse is knocked out.

All other causes require the intervention of a Washer Repair in Rancho Penasquitos, CA professional.

No matter what happens to your washer – you can always count on the Appliance Service Center for help. Our selection and delivery of genuine washer parts, repairs and replacements for worn-out parts are handled by Rancho Penasquitos Washer Repair and Service appliance repair technicians. The main thing is not to leave the first signs of your washer’s troubles unattended, such as slow water intake, noisy flushing and wringing, water leaking in, apparently.