A kitchen hood is essential for comfort, because without a cooker hood it would be impossible to be in the kitchen, especially when there is a cooking process. The cooker hood is first and foremost a household appliance, so it can happen that it stops performing its functions or performs them intermittently. In that case, you can contact our company Appliance Service Center. For fast repairs, our company provides quality Whirlpool Hood Repair in San Diego County.

We have the best professional technicians who will perform quality appliance repairs. They have over 20 years of experience. We have been in business since 2001.

Possible causes of faulty kitchen hoods

Violation of the rules of operation

The filters in the hood must be cleaned. The mesh filter must be cleaned at least once every three weeks, but the charcoal filter must be completely replaced every six months. Do not turn on the device, if under it there is no cooking process, but only the stove is on.

Hot air will quickly destroy the hood. Properly turned on should be three minutes before cooking begins and turned off fifteen minutes after cooking ends. Whirlpool Hood Repair and Service will explain how to operate the equipment properly.

Improper installation

When installing a hood, follow the manual and general codes, or the appliance may fail sooner. Contact Whirlpool Hood Repairs, we do all work on proper hood installations.

Faulty wiring

When an appliance malfunctions, the first thing you should do is check your RCD.

A rare case of breakdown is a broken contact. A kitchen hood that is repaired for this reason is of Chinese origin. Our Whirlpool Hood Repair and Service professionals, quickly perform RCD replacement.

No light when working

Many homeowners turn on the hood light to illuminate the work area, as this is a more economical and rational approach, with no need to install additional lights. If, however, the light stops turning on and the hood is malfunctioning, repairs are done in the following ways:

• Check the light bulb (with frequent use, it could have simply burned out).
• Check the operation of the fan on the hood.
• The cause may be insufficient voltage. It can be checked with an indicator screwdriver. If the socket is good, then the next step is to check the cord for continuity. Whirlpool Hood Repair will fix the breakdown in no time.

Weak draught

Such a malfunction as a weak drought is much easier to fix. To do this, the grease filters are checked first. Often, they are the reason why the kitchen hood malfunctions. Repairs can be done on your own. To do this, you should wash the grease trap.

If cleaning the filters did not help, you need to check the draft in the ventilation itself. To do this, use the old proven method with a lighted match or lighter. Bring it to the vent hole and look at the flame. It should be drawn into the grille. If it doesn’t, you should call a Whirlpool Hood Repairs and Services technician to clean the ductwork.

Heavy noise

The cause of high noise produced by the hood can be poor quality assembly at the factory or cheap materials. Then it’s about the manufacturer and there’s nothing you can do. But when there is no doubt about the company and the quality, the first thing to check is the fixing of the hood to the wall.

Even a small distance can lead to a strong vibration, and hence the noise that the kitchen hood makes. Repair consists of fixing the parts of the fasteners. Our Whirlpool Hood Repair specialists will fix this problem.

Thanks to the great experience of Appliance Service Center staff, access to a warehouse with original spare parts, we carry out repairs promptly and qualitatively. Whirlpool Hood Repair and Service specialists can make use of the service by simply leaving a request or by making a call on the website. We also accept appliances for repair from all regions of the country.