You can find an exhaust hood in every kitchen. If your kitchen hood does not turn on or does not draw air, then you need to have your hood serviced. Before repairing it, you need to familiarize yourself with its construction. The design of the hood is quite simple. You do not need to waste your energy on repairs, but you should contact our company Appliance Service Center. For fast repairs, our company provides quality Avanti Hood Repair in San Diego County.

Major causes of hood breakdowns

If your hood is more than a year old, then you may not need to repair it anymore. But if you have just purchased this product and it breaks, then you should think about repairing it and contact the Avanti Hood Repair and Service technicians. The first thing you will need to do is to find the cause of its breakdown.

Improper operation of the exhaust system

The strainer that is on the hood needs to be cleaned every three weeks. You need to replace the charcoal filter every six months. You can’t run the exhaust fan over a stove that’s on unless there’s a pot on it. 

The hot air will quickly disrupt the exhaust system and it will malfunction. The hood should be turned on three minutes before cooking begins and fifteen minutes after cooking ends. Our technicians perform warranty and post-warranty Avanti Hood Repairs.

Broken contacts

If your hood operation is accompanied by a slight vibration, then it may cause a contact breakage. This happens quite rarely and only with Chinese products. Contact us for Avanti Hood Repair and Service, we carry out all the work at the customer’s place, quickly and with a long warranty.

Incorrect hood installation 

If the installation was done incorrectly, then the unit may stop working.

Lights don’t come on

Very often, many people use the hood just to light the panel. This approach is considered efficient because it is cheaper to use the hood than the lights. If the lights on the hood are not working, then you should contact the repairmen for Avanti Hood Repair.

The hood is dragging weakly

You should check the grease traps for contamination. Often, the hood is poorly vented due to clogged filters. If necessary, you can simply clean the filters. You can do this when you contact our company, our Avanti Hood Repairs and Services specialists will fix the problem. Another reason for the hood not pulling properly could be the lack of draft in the ventilation ducts. In this case, the draft can be checked with a lighter.

Extractor not working completely

If nothing happens after turning on the button on the panel, then it is necessary to make repairs. To repair the hood in the kitchen is much more difficult. First you need to check the cord and RCD. If you do not find faults, then you need to perform a “wire test” of the circuit with a multimeter.

Noisy fan

If the hood buzzes a lot, then the cause of this breakdown can be a poor-quality manufacturer. If you are confident in the quality of your device, then you should check the quality of its attachment to the wall. Even a small distance that can be left between the walls can cause a lot of noise. To fix this problem, you need to tighten all fasteners.

Doesn’t switch speeds

If the hood doesn’t switch speeds, then the problem may lie in the control box button. You should visually inspect your circuit board. It is possible that the contact on it just burned out. In addition, the starting capacitor may be the cause of the problem. In this case, the capacitor should simply be replaced by inviting the Avanti Hood Repair technicians.

All of the above and many other hood malfunctions can easily be repaired by an Appliance Service Center technician. Do not allow an unqualified technician to repair your hood – it’s dangerous to your health in the first place! Contact only experienced Avanti Hood Repair and Service technicians.