Maytag Cooktop Repair
People who prefer to buy their appliances from trusted and reputable companies don’t need repairs as often, but it gets more complicated when the warranty period ends or if the official service center is far away and it takes a long time to get there. At Appliance Service Center, we believe that people who choose premium electronics should also receive quality service, so we offer only the best Maytag Cooktop Repair in San Diego County.
Why this company?
Cooktops are slowly replacing traditional freestanding cooktops because of their higher level of comfort and convenience. But even the most reliable kitchen appliances occasionally malfunction and stop working. That’s when Maytag Cooktop Repair and Service from professionals at a reliable repair shop is required.
Masters can easily perform Maytag Cooktop Repairs – employees know how to work on any model with touchscreen controls. In addition to professional repair of electronic controls, the workshop also replaces switches and temperature sensors, fuses, and thermostats.
Only original spare parts for cooktops will be installed to replace worn-out elements. In addition to replacing and restoring the control modules, craftsmen will be able to replace the heat-resistant bulbs backlight, and re-solder the power supply pins. Also, specialists can easily solve the problem of moisture penetration into the body of the panel.
The price for Maytag Cooktop Repair and Service in our workshop is very democratic: addressing to masters is in any case a serious saving, because instead of buying a new stove masters will repair the complex and expensive kitchen equipment quickly and efficiently!
Appliance Service Center is high quality Maytag Cooktop Repair! Professional craftsmen make home visits to all areas of the city, and a warranty card is issued for the work and parts for your panel.
All modern cooking surfaces work on the same principle – the user affects the control sensors, so that the power relays are activated, switching high currents in the heating elements.
Therefore, it is first necessary to localize the breakdown, that is, to determine the defective assembly. It is assumed that the cable, connection terminals, fuse, presence of voltage are checked, and command set errors are excluded.
The sensor does not work – the cooktop does not turn on
One of the rare and most difficult faults of touch cooktops. You can again check the circuit, if there is no breakage, you will have to replace the touch panel completely, but it is better to give it for repair. The cause can be improper use, care with prohibited means. Only a Maytag Cooktop Repairs and Services specialist can repair at home.
If one or two burners do not work
Check the wire supplying voltage to the heating element. Under the influence of temperature, it is soldered off. Repair is very simple, just solder it back into place with a soldering iron. If the circuit is not broken, you have burned out the FET itself, you will need to buy a new one and replace it. Before replacing, make sure there is a circuit between the heating element and the control panel, the cause of the failure may be a bad contact.
Cracked glass ceramic surface
Find out the reason, if you have not dropped anything heavy, then apply under the warranty to the service, this is a typical factory defect, the manufacturer will repair free of charge. If you yourself are to blame for the crack, you’ll have to give the panel for repair, your own hands to replace is difficult enough. Please note, Maytag Cooktop Repair to replace the glass is very expensive, so operate the panel according to the instructions.
The burner heats badly or does not work at all
The reason is a bad contact with the heating element, thermostat, or thermostat – check the presence of electricity in the circuit between these segments.
The cooktop switches on by itself, although there is no cookware on the burner.
Remove all metal objects and clean the stove of salt, if this does not help, you have a problem in the control unit, you need to repair or replace it. It is better to go to the service.
Appliance Service Center of the highest quality and at the most affordable price is available to you 24/7! All you have to do is call the listed phone number and ask for Maytag Cooktop Repair and Service or leave a request on our website and the perfect solution is just around the corner!
Reasons to Trust us
We use only professional equipment and tools, original spare parts, and high-quality consumables. Our technicians have 20 years of experience working with all types of household appliances from well-known brands. Specialists constantly improve their skills to provide you with high-quality services.
Frequently Asked Questions
The following measures are recommended:
- Turn off the power.
- Dry the cooktop surface.
- Avoid use until completely dry.
- Check functionality.
- Prevent recurrences.
If problems persist or serious problems arise, it is best to contact our Maytag Cooktop Repair service center for more detailed diagnosis and repair.
As a Maytag Cooktop Repair company, we use a variety of tools and equipment to get the job done. Below are some of the basic tools and equipment we use:
- Disassembly tools.
- Replacement parts.
- Temperature checking equipment.
- Repair manuals and technical data.
Checking and replacing a damaged safety thermostat can be done as follows:
- Turn off the power.
- Disassemble the cooktop.
- Locate the safety thermostat.
- Test the safety thermostat with a multimeter.
- Replace the safety thermostat.
- Reassemble the cooktop.
- Turn on power and check operation.