thor oven repair services

Thor Oven Repair

Ovens are reliable appliances, but factors such as: voltage fluctuations, improper installation of the unit, damage during shipping, or improper use can cause equipment to fail prematurely. Our Appliance Service Center repairs ovens quickly, efficiently, and affordably. You don’t need to waste your precious time on tedious trips to the repair shop, our experts at Thor Oven Repair in San Diego County will come to your home themselves.

Our service center employs the best professional craftsmen at Thor Oven Repair and Service to perform quality home oven repairs. They have experience of more than 20 years. We work since 2001.Below we will list the most common breakdowns of ovens that often occur in practice.

Possible oven faults can be divided into four big groups. The first is connected with external reasons, namely with problems of house wiring, the second – with infringements of rules of operation, the third – with physical deterioration of the device at continuous operation, the fourth – with a factory defect that is practically excluded at purchase of techniques of the checked-up brands. at these malfunctions experts of Thor Oven Repairs will help you

The device knocks out the automatic machines

Electric oven is quite a powerful consumer. For its connection, it is recommended to provide a separate line of wiring and protection elements. If the wiring is not rated for the oven’s power, the network will be overloaded, and the circuit breaker will trip. 

If the circuit breaker is triggered while the oven is heating up, there may be a leakage current to the cabinet. This is a very dangerous situation, it is strictly forbidden to use such an oven. If the automatics trip, the oven must be turned off and contact Thor Oven Repair and Service immediately.

The grill does not turn on

If the grill in your oven won’t turn on, there could be several reasons. One of the most likely is a failed heating element. In addition to the thermal stresses, the grill element is subject to moisture, grease, and other contaminants released by food during cooking.

If not cleaned in time, over time, the fouling on the surface of the heater will form a dense layer. As a result, the heating element will work with an increased load and will soon burn out. It is possible to correct the malfunction only by replacing the heating element. This repair is carried out only by Thor Oven Repair technicians.

The convection fan doesn’t work

The presence of the convection mode allows you to ensure uniform heating of the entire volume of the working chamber of the oven. Circulation of air is performed through the work of the fan, located most often on the back wall of the chamber. If after turning on this mode, the fan does not start to rotate, the cause of the malfunction should be sought, starting with checking the wiring of the device. It should only be checked by Thor Oven Repairs and Services. 

Broken door glass

The doors of modern ovens use special heat-resistant glass capable of withstanding temperature fluctuations. Cracks in the glass can be caused by a factory defect, namely by failure to manufacture the glass. 

To use the oven with cracked or broken glass is strictly prohibited, as there is a risk of thermal burns or injury from fragments. Damaged glass must be replaced. Thor Oven Repair technicians will replace the glass quickly and within the agreed time frame.

Broken switches or touchpad

The oven’s operating modes are set by means of rotary switches or the touchpad. Prolonged use can cause the springs on the switch contacts to weaken and melt the contacts themselves. Often the reason for breakage of the switches is the ingress of water, grease or dirt on their working surfaces. In this case it is possible to restore the operability of the switch by disassembling and cleaning it with alcohol. If the element cannot be repaired, the solution is to replace it.

If the electric oven is malfunctioning, unplug it and contact the Appliance Service Center. Do-it-yourself repairs are not only impractical but also dangerous. Without knowledge of the oven’s construction, you may damage the fasteners or damage the insulation while disassembling it. In addition, an unqualified repair may result in a risk of electric shock during and after the repair, if the appliance is used. Only an experienced Thor Oven Repair and Service technician can correctly diagnose a malfunction, and even more so, determine the causes of the malfunction. 

Fast & Reliable Service

We repair breakdowns of any complexity on the spot and provide a long-term guarantee.

Licensed & Insured

We have all the necessary licenses to provide household appliance repair services.


Reasons to Trust us

We use only professional equipment and tools, original spare parts, and high-quality consumables. Our technicians have 20 years of experience working with all types of household appliances from well-known brands. Specialists constantly improve their skills to provide you with high-quality services.

Affordable Prices

We offer the best prices and favorable discounts for household appliance repair.

Friendly Technicians

Our technicians are always accurate in their work, polite and friendly with customers.

Frequently Asked Questions

Do you have questions about oven repair? Before you contact our operator, we suggest you look at the frequently asked questions that our company’s customers ask.

Here are a few steps to follow for Thor Oven Repair: 

  • Unplug the oven from the power source. 
  • Open the oven door and find where the door is attached to the hinges. 
  • Disconnect the door from the hinges.
  • Install the new door on the hinges.
  • Secure the door to the hinges by tightening the mounting screws.
  • Turn on the oven and verify that it is operating properly.

Our company follows all necessary standards and regulations when servicing and Thor Oven Repair to ensure the safety and quality of our services:

  • Compliance with safety standards.
  • Using only genuine replacement parts.
  • Compliance with oven manufacturers recommended instructions.
  • Qualified personnel.
  • A guarantee on services.
  • Regular maintenance and preventive maintenance.

Replacing a faulty oven timer can be done as follows:

  • Remove the oven control panel. 
  • Locate the timer on the control board. 
  • Remove the timer from the control board by removing the few screws that hold it in place.
  • Install the new timer on the control board and secure it with the screws.
  • Connect the wires to the new timer.
  • Connect the power to the oven and check that the new timer works correctly.