kenmore stove repair services

Kenmore Stove Repair

Perhaps the most indispensable helper in the kitchen is the electric stove. However, when used or installed improperly, breakdowns often occur. The human factor plays a major role here, and breakdowns rarely occur due to the expiration date of the parts. That’s why if a stove breaks down, many people turn right to our Appliance Service Center company. We provide quality Kenmore Stove Repair in San Diego County. Our company provides warranty and post-warranty repairs for your equipment.

Causes of electric stove breakdowns

One of the most common malfunctions is electric heating element burnout

For example, you should not put cookware with an uneven bottom on the burners when cooking. Also avoid using cookware that is much smaller in diameter than the heating element itself. As a result of a noticeable difference in area, the burner begins to heat air instead of the pot or pan. Kenmore Stove Repair and Service specialists can help solve this problem.

It is also detrimental to the stove that we often leave the burners on, which overstressed and burns out the heating elements. Furthermore, the energy consumption which is wasted becomes much higher. Always use dishes with a flat bottom, matching or equal in diameter to the heating element.

Under no circumstances should you attempt to repair electric stoves yourself, it can cause even more damage to your technique. Let specially trained Kenmore Stove Repairs repair your stove.

Another serious breakdown is a short circuit between the heating element and the appliance housing or output contact. This can happen if you leave a heavy object on the burner. As a result, the heating element can be deformed.

An uneven bottom of a pan or pot can also damage the surface of the heating element and cause costly breakdowns. Kenmore Stove Repair and Service technicians will fix this breakdown and at affordable prices.

The burner turns on, but does not heat up

Very often this happens because there is no voltage in the network, so the first thing to do is to check whether the current flows to the electric stove. If so, the problem may be a faulty coil or controller knob, which will require replacing all the wires. One of the most common problems with tabletop electric stoves is that their coils deteriorate quickly.

This is the main reason for the lack of even heating of the burner. The good news is that it’s not easy to get to this part in the design, because it’s hard to get to it without a Kenmore Stove Repair technician to repair the coil or replace it completely.

If the burners stopped working and the indicator lights went out, it means that the voltage in the socket disappeared. Could have blown fuses, triggered automatic protection, de-energized the electric network. First you should check all these factors, if everything is intact, it is better to ask if the stove works at the neighbors – this will know whether the power grid is de-energized or only in your house there are problems with electrical wiring.

If, on the contrary, the burner is warm, but the heat does not correspond to the position of the switch, you can assume that one of the coils is broken or the switch is broken. In case of a broken coil, you need to replace it, if it is intact – you need to replace the switch. Kenmore Stove Repairs and Services has a full range of replacement parts available.

Practice shows that breakdowns of electric stoves occur due to careless and improper use. The electric stove is used for cooking special dishes, but not for other purposes, such as drying laundry or heating the room. Therefore, the stove will serve you well and for a long time if you pay a little more attention to careful and proper use. But if your stove is broken, contact the experts at Kenmore Stove Repair immediately.

Every appliance needs decent care and service from a trusted Appliance Service Center company. Always turn to the experts at Kenmore Stove Repair and Service. In some cases, repairing an electric stove on your own can turn out to be disastrous. Your own initiative in this case may be punished by buying a new electric stove.

Fast & Reliable Service

We repair breakdowns of any complexity on the spot and provide a long-term guarantee.

Licensed & Insured

We have all the necessary licenses to provide household appliance repair services.


Reasons to Trust us

We use only professional equipment and tools, original spare parts, and high-quality consumables. Our technicians have 20 years of experience working with all types of household appliances from well-known brands. Specialists constantly improve their skills to provide you with high-quality services.

Affordable Prices

We offer the best prices and favorable discounts for household appliance repair.

Friendly Technicians

Our technicians are always accurate in their work, polite and friendly with customers.

Frequently Asked Questions

Do you have questions in the area of kitchen stove repair? Before you contact our operator, we suggest you look at the frequently asked questions that our company’s customers ask.

If your stove heats up too much and doesn’t adjust, it’s important to take the following steps:

  • Immediately turn off the stove.
  • Check the temperature controls.
  • Check the thermostat.
  • Contact a professional.

It is important to contact the professionals at our Kenmore Stove Repair company, especially in cases involving gas stoves. 

Our kitchen stove repair company has the following certifications and accreditations:

  • Repair license.
  • Manufacturer certification.
  • Trained staff.
  • Compliance with safety standards.

Our company is committed to professionalism, quality and safety in providing Kenmore Stove Repair services. We are constantly updating our knowledge and keeping up with changes in the industry to keep up with the latest technology and best practices in kitchen stove repair.

Here are some steps to help you clean and keep the burners on your gas stove clean:

  • Turn off the power.
  • Remove the burners.
  • Clean the burners.
  • Clean the burner holes.
  • Check the burner tubes.
  • Remove the pot stops.
  • Check connections.
  • Ventilate and check.