If your washing machine refuses to rinse clothes, then this article will be useful for you.   As a rule, users learn about the non-working rinse mode in the middle of the washing cycle. The machine started to work, habitually humming, and then froze with water, never reaching the rinse mode.   The first and most important thing you need to find out is whether only the rinse mode does not work or the drain and spin also do not start. To do this, select the drain mode and try to turn it on. If the washing machine does not perform any actions and remains full of water, then it is clear that the spin and drain mode does not work.   In this case, check the drain hose of the washing machine. It may be twisted or damaged by some heavy object. In addition, check if there is a blockage in the sewer.   If everything is to no avail, and the water is still in the machine, then there is a breakdown in the washing machine itself. In this case, you need to turn off the unit and drain the water using a drain filter. Rinse and wring out things will need to be done manually.   The most popular reasons why the rinse, spin, and drain mode does not work:   – The drain filter is blocked. There can be a lot of different debris in the wastewater. This is not only dust, but also threads, lint, buttons, and everything that could be in the pockets of clothes. Thus, the filter could be clogged with this debris, as a result of which the water does not pass.   – Faulty water level sensor. This sensor determines the volume of water in the machine. Based on its data, the board sends a signal that the machine either drains the water or collects it. If the sensor fails, the washing process stops.   – Damage to the drain pump. One of the most popular reasons why the machine does not rinse or spin is a broken pump. As a rule, such a breakdown occurs after prolonged use of the washing machine or small objects falling into the pump.   – Failure of the control module. The module is the “brain” of the washing machine. Therefore, if the module does not give any commands, none of the modes will be carried out.   It often happens that the machine does not rinse even with a working spin and drain. What is the reason for this malfunction?   This problem can occur due to a malfunction of the heating element or electronic module.   So, as you can see, almost all malfunctions when the machine refuses to rinse the laundry are associated with improper operation of the equipment. Therefore, to avoid such problems, try to monitor your machine and follow all the rules for its operation.    It’s time to call for professional appliance repair in San Diego County. San Diego Appliance Repair Service is here to help with professional and experienced appliance repair to make your smooth cooktop look new again.   Contact us   (619) 719-5005   [email protected]