Fixing A Refrigerator That Has A Leak
Now, the truth is that the fridge is one of the most integral kitchen appliances and it’s critical that it functions properly. Malfunctioning refrigerators could be the cause of food gone bad and other issues which could be a potential health hazard. With this in mind, one of the most common problems is a leaking refrigerator. That’s why below you will learn how to troubleshoot and fix this particular issue. If you discover that there is water on the kitchen floor close to your fridge, the first thing that you need to do is to check for leaks right there in the water line to the icemaker. You should also check the valve. If they are both dry, the chances are that the drain line of the evaporator is clogged. The water is coming from frost as well as ice buildup on the coil of the evaporator which melts because of the defrost cycle. Typically, this water is going to drain into the pan which is located in the bottom of your fridge. What happens then is the condenser fan blows air which has been warmed up across the entire pan so that the water can evaporate. However, if the drain line is clogged, the water is going to overflow – it’s as simple as that. Once this happens, the water will start seeping down the interior walls of your freezer and pour down right on the floor. You can easily fix this problem on your own and the task is going to take you about a few hours. If you are looking for a way to spare some money, this could be a great opportunity. In order to reach the drain, the first thing you’d have to do is to remove the access panel. It’s located on the back of the bottom freezer. However, keep in mind that every unit is particularly different so it’s a good idea to check out the user’s manual or go online to look for proper instructions. Once you’ve accessed the interior, you need to clean the debris which has stacked on the evaporator drain and gutter. After that you need to pour warm water into the gutter. This is going to melt the ice. Once it’s done – snake the drain with the actual tubing and flush water right through it once again. If it flows easily, you’ve done a good job and you can put everything back together. However, if this doesn’t work, you would need to contact a specialist. For this particular DIY project, all you are going to need is a 4-in-1 screwdriver and a regular flashlight – nothing else than that will be required. However, if you get stuck in-between the repair or mess up the repairs, it is important that you call in the best service. The appliance repair service will ensure that they evaluate and repair the refrigerator as needed. Contact us:

(619) 719-5005

[email protected]