It goes without saying that your range and oven are amongst the most important appliances in your kitchen. These are the tools which are basically putting food on your table, and that’s why you need to ensure that everything is handled as per the highest industry standards when it comes to them. This is not as challenging as you may think. However, there are quite a few things that may go wrong and you need to identify the issue at first.
One of the most common complaints is when the element of the range doesn’t heat up. This might seem like a significant issue and it truly is if you don’t know how to handle it. Below you will find some of the most common causes of this particular issue and the parts which may malfunction and cause the issue.
Surface burner element
These are usually ribbon coil, solid type or coil type as they are used in smooth top ranges. All of these are actually containing heating wire which is going to use an electric current in order to comprehensively produce the necessary heat. The coil type elements can actually be checked for continuity. In order to do so, you need to remove them from the terminal block. After that, you need to start testing with a convenient multi-meter. Lack of continuity might be causing your heating elements to fail at the production of enough heat.
Surface burner switch and the infinite switch
The infinite switch which is located on your control panel could be malfunctioning. If you don’t get the necessary heat at the element, this is an obvious sign to check it out. Disconnect the power and make sure to remove the back panel of the console. Locate the switch and make sure to check for wires which are overheated or if there is a terminal which is faulty. Test the contacts of the switch for proper continuity.
Now, it’s important to understand that these are just the two most common parts which are capable of malfunctioning and hence causing the lack of heat at the surface of the element. This is something which is going to provide you with a lot of frustration as it’s going to prevent you from cooking. In order to ensure this, your best bet is to get in touch with an appliance repair professional as soon as it’s possible. Sure, it’s going to cost you a few extra bucks but at least you can rest assured that everything is handled professionally. This is also going to ensure reasonable timelines. There are plenty of companies in San Diego County that work on all ovens and ranges. Not only will they be willing to send over a technician, but the repairs might be completed on the same visit. They ensure adherence to all standard requirements and quality measures so that after the repairs, your oven is as good as new.