So, you set the temperature, the timer and sent the dish to bake, and when it was finished, you found that it was beautifully browned on top, and the bottom remained in its original form. This phenomenon indicates a possible malfunction of the heating element of the oven. In order to make sure that the heater is broken, turn off the device and give it time to cool down completely. After the oven becomes cold, turn it on and carefully feel the bottom or top (depending on which zone the food is not cooked in), if there is no heating, it means that the heating element has burned out and needs to be replaced, you can do it yourself without the help of a master , but only if you have experience.
In order to replace the heating element in the oven with your own hands, you will first need to purchase an identical part in a specialized store. The lower heating element is located on the outside of the bottom of the oven, it is fastened with screws and connected with terminals. The upper one, respectively, is located in the upper part of the oven. Disconnect the device from the power supply network and dismantle the old part, and install a new one in its place, after that you can continue to enjoy the operation of the oven.
The oven does not heat up
If you turned on the oven, but noticed that it does not heat up at all, while the light in it is on, pay attention to the heating indicator, if it does not light up, most likely the malfunction lies in the thermostat or the thermostat sensor. In order to carry out the repair of an electrolux oven or an appliance of another brand, it is necessary to replace the part. To do this, it is necessary to remove the regulator handle and unscrew the bolts that fasten the thermostat. After that, dismantle the failed element and install a working one in its place. If you are not sure that you can handle such work yourself, we recommend that you contact a master.The oven shows no signs of life
You turn on the oven, but it does not react at all, namely, the light inside does not turn on, the timer does not show, there are absolutely no sounds? There can be many reasons for this behavior of the device, let’s figure out what needs to be checked first before calling the master.- Is there light in the house? Perhaps you simply did not pay attention to how the electricity was turned off or the automatic machines were knocked out.
- Is the outlet for the oven working? In order to check this, you can use an indicator screwdriver or plug in any other electrical appliance, such as a hair dryer or an iron. If the outlet is faulty, it must be repaired. It should be noted: if you absolutely do not understand anything in electricity, it is better not to make repairs yourself, but to contact a professional.
- Are the cable and plug for the oven working? To diagnose these elements, you need to arm yourself with a tester and check them for resistance. If the plug is defective, it must be replaced. If the wire has broken or melted and there is no resistance, you can cut off the damaged section, twist the wires in place and insulate, or replace the element completely together with the plug.