How To Handle A Dryer That Gets Too Hot?

While it’s true that the dryer is a very important piece of your electric appliance equipment, it’s also one which could cause some problems. Keep in mind that this is a device which is going to develop quite some temperature and you need to ensure that it’s properly taken care of in order to prevent any potential malfunctions and mishaps.

One of the common complaints that people tend to have is when their dryer develops a significant heat, uncharacteristic for the machine. This is potentially dangerous as lint and other debris could catch fire and hence cause significant and life-threatening issues in your home. This is why you need to ensure that everything is handled properly and that you interfere on time. There are quite a few internal components which may be causing this problem, so let’s have a quick look at the most common ones.

Effective Cycling thermostat

This is the part which is designated to monitor the temperature which is developed in the blower housing. What is more, it’s also designated to cycle the heating element or the gas burner and to turn them on and off as it is required to maintain the proper degrees in the machine. However, if it can’t accurately sense the proper temperature of the airflow, the heater or the gas burner might stay on for far too long and create a temperature which is far from being safe.

High limit thermostat

This is a thermostat which is designated to protect the machine from overheating. The reasons could vary but restricted airflow usually tops the charts. This is a device that’s located right above the main heat source and it’s designed to be activated only when the airflow is particularly reduced. As the airflow decreases, the temperature is going to increase, hence causing significant issues. If your thermostat doesn’t prevent this from happening, you are in serious troubles.

Thermistor

Thermistor is a component which is usually seen in newer models. Some of them might use a thermistor instead of a cycling thermostat as described above. This is the component which will regulate the temperature in the dryer drum. It’s usually located on the blower housing and it’s designed to sense the temperature of the airflow as it leaves the drum.

In any case, it is particularly important for you to consider using the services of a professional appliance repair technician to fix this particular problem. The reason is quite logical – this is an issue which could potentially cause a fire hazard and it’s absolutely critical to handle it properly. This is the main reason for which you should rely on an expert. Most of the appliance repair services have trained and experienced technicians that are licensed to work on all appliances. Thus, make sure that you shop and compare prices before selecting the right company that is licensed, insured and bonded.

Contact us:

(619) 719-5005

[email protected]